final wax stage

This is the amethyst ring as finished wax model.
Next step, make a prototype mold.
Then inject a wax model into mold.
Then cast a metal prototype from wax model.
Then a production mold made from the metal prototype.
Then another wax injected model.
Then cast an actual metal ring.

doings

So I got the outer shank for the amethyst ring 'roughed in' today. (It has a crown (bezel area) salvaged from the door pendant.)

Did not think about the difference between a ring mount and a pendant mount and the crown/shank meeting gave me fits. And I could not get the shank style right - kept making it too nice and pretty. It is finally where it will (or will not) be, it now needs some 'chaos' added and I think it will work. After that, the inside shank must be filled in, rounded and smoothed. Then a general clean-up.

The bezel area has a strange 'flared square' shape that leaves prominent corners at the base. At first this seemed too bulky. Usually when working on a piece, an oddity will either become increasingly annoying, and scrapped, or your eye will normalize the unique design. So far leaning slightly to the latter -- hard to know in this case until it gets to the point of being metal: as worn, as felt.

I get the ring finished and another creepy pod pendant and I can do a 3-month-overdue casting.

new ring

OK, so for what I am working on today, thought I would use the experience gained on the garnet door pendant and use it to make a ring. I am also going to salvage the 'bezel area' from the pendant. It will have 'wood' sides as the base of the bezel, and 'stone work' as the shank.

It will probably not have a elaborate story like the door. Probably with a faceted 4x6 rectangle cut amethyst.